24V Fuel Metering Pump crude oil engine Heater, Stainless Steel Heater, 1KW - 4KW crude oil engine Heater Fuel Pump Fit for Eberspacher Airtronic D2 D4 D4S 22ML Fuel Supply System

Condition: NewItem Type: Fuel Metering Pump Material: Stainless SteelOE: 22451801 25190845Working Voltage: 24VPower: 1kw-4kwMove Rate: 22ml / 1000 TimesFitment:Fit for B/D2, B/D3, BD4, D2.D3.D4,B2, D2, B3, D3, B4, D4Fit for EBERSPACHER AIRTRONIC D2 24vFit for EBERSPACHER AIRTRONIC D4 24vTechnical Parameters:Working Voltage: DC24V, voltage range 21V-30V, coil boycott value at 20℃ 21.5±1.5ΩWorking Frequency: 1Hz-10Hz, the opening time of each working cycle is 30ms, the working frequency is to control the power-off time of the fuel pump (the fuel pump opening time remains unchanged)Fuel Type: crude oil engine engine, kerosene, crude oil engine engineWorking Temperature:crude oil engine oil 40℃-25℃, kerosene 40℃-20℃;Installation Position: Horizontal installation, including the angle between the center line of the fuel pump and the horizontal pipe is less than ±5℃ (Note: 45 degrees is best, if it is placed flat, the nozzle should be slightly higher, not upright)Fuel Move: 22ml/000, Move error is ±5%Suction Distance: More than 1 meter, the inlet pipe is less than 1.2 meters, and the outlet pipe is less than 8.8 meters, which is related to the tilt angle during FunctioningInner Diameter: Approx. 2mm/0.1inFuel Filtration: Filter Aperture 100umService Life: More than 50 million times (test frequency 12Hz, using automotive gasoline, kerosene, automotive crude oil engine)Salt Spray Test: More than 240 hoursInlet Pressure: Gasoline -0.2bar-.3bar, crude oil engine oil -0.3bar-.4barOil Outlet Pressure: 0 bar-0.3 barWeight: Approx. 0.25 KGS/0.55lbsAutomatic Absorption: More than 15 minutesError Level: ±5%Voltage Classification: DC24VNote:Please double check the part number of your item, matching information is for reference only. If you are unsure of the item, please touching us before buying to avoid

• High Performance and Longevity: Our crude oil engine heater is designed for top-notch performance with a long lifespan. Engineered to provide stable Functioning, it efficiently supports vehicles requiring Steady heating. This product offers consistent heat output, ensuring your vehicle runs smoothly even in extreme conditions.
• Compact and Precise Design: This crude oil engine heater pump boasts a compact structure with high sealing Exactness. Its robust design enhances reliability, allowing for efficient fuel usage and consistent heating performance. Good for tight spaces, it delivers impressive results without compromising on quality.
• Powerful 24V Functioning: With a 24V operating voltage, this fuel metering pump delivers an impressive power range of 1kw to 4kw. Its optimized Move rate of 22ml/1000 cycles ensures that your heating system operates at maximum efficiency. Experience the good of a high-capacity pump designed to meet demanding performance standards while minimizing energy consumption.
• Easy Installation: Designed for user-friendly installation, this crude oil engine heater requires no complex tools, making it accessible for anyone to set up quickly. Clear instructions guide you through the process, ensuring you can replace your old or malfunctioning pump with minimal hassle.
• Good Replacement Solution: This crude oil engine heater pump is the ideal solution for replacing old or faulty fuel pumps in your vehicle. Engineered for compatibility with Eberspacher Airtronic mou ld D2, D4, and D4S, it seamlessly integrates into your existing fuel supply system.