FST Performance RPM350 FloMax 350 Clear Anodized -6/-8 AN Port Fuel Filter/Water Separator System

This is a High Performance/Racing Fuel Filter/Water Separator System. This was designed to combine ultra high efficiency fuel filtration in the smallest possible package measuring only 4.75 inch tall. The high fuel flow capabilities and extremely low fuel flow restriction of the FloMax350 series coupled with highly efficient 4 micron filtration and water separation make this the most innovative and efficient system ever built. Is designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications. Engineered for either suction or pressure side mounting the FloMax350 offers the utmost in installation flexibility plus the multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port and other fuel accessories. It flows 300 gallons per hour and has a filtration efficiency of 4 microns. Burst pressure for this unit is 250 PSI. Filter measurements are 4.75 inch height, 3 inch width and 3.75 inch depth. Unit weight is only 24 ounces. Featured -8 AN ports with -6 reducers if needed. Made of solid billet aluminum to eliminate casting porosity, leaking or air intrusion. Designed to handle over 2000 HP. Exclusive EZMOUNT design allows easy mounting on a tube chassis or a surface mount. For a replacement filter, use part # RF500..

• High fuel flow capabilities and extremely low fuel flow restriction coupled with highly efficient 4 micron filtration
• Designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications and engineered for either suction or pressure side mounting
• Multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port, flows 300 gallons per hour with a filtration efficiency of 4 microns and burst pressure for this unit is 250 PSI
• Filter measurements are 4.25 inch height, 3 inch width and 3.75 inch depth; unit weight is only 19 ounces and features 1/2 inch NPT (pipe threads) ports; made of solid billet aluminum to eliminate porosity, leaking or air intrusion