Heat Activated Laminating Pouches 2-1/2" x 4-1/4" x 10 mil 2 Sides (64mm x 108mm x 250 mic x 2 Sides) Luggage Tag Size with Slot Hole one Short Side [pk of 500] Clear Gloss

Heat Activated Laminating Pouches Luggage Tag size 2-1/2" x 4-1/4" x 10 mil 2 sides (64mm x 108mm x 250 microns thick x 2 sides) with slot hole one short side for an attachment device which must be purchased separately. Laminate is high clarity after adhesive is heat activated. The clear glossy finish protects and enhances colors. These laminates are 10 mil thick on each side flap for maximum strength, rigidity and protection. ALERT: Many pouch laminators on the market can seal a maximum of only 5 mil pouches, so PLEASE make sure your laminator is capable of sealing 10 mil pouches prior to ordering. (If you don’t have your machine’s manual, a good reference is if your laminator has either a speed control OR a temperature control, it will likely seal 10 mil pouches). This product has heat activated adhesive compatible in all thermal pouch laminators capable of sealing 10 mil 2-1/2” x 4-1/4” laminating pouches. FEATURES:Waterproof and Resists Penetration by Chemicals, Greases, and Oils High glossy finish brightens colors dramatically Small Pre-rounded Corners for a Smooth Professional Finish approximately 1/8” radius (3mm) Metric Pouch size: 64mm x 108mm 250 microns thick (x 2 sides = 500 microns total thickness added to your sheet) Recommended insert sheet size Maximum: 2-1/4" x 3-11/16" (57mm x 94mm) to provide a minimum standard 1/8” (3mm) sealed border protecting your card’s edges while avoiding the pre-slotted hole area (if desired) Made of 2 Durable 10 mil polyester plastic sides including heat activated adhesive (20 mil total encapsulating and waterproofing your sheet) which becomes clear when heat and even pressure is applied (laminator recommended)Note: Industry standard specification for 10 mil laminating pouches is 10 mil on each flap for a total of 20 mil added to your paper card. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches; however, are sealed on only one edge instead of three (more like a file folder than a pouch, but with a 3/32” flat folded spine). TYPICAL APPLICATIONS:Luggage Tags Trade Show Gifts (laminating business cards into luggage tags) I.D. Cards Badges Proximity Cards Band Passes Machinery & Parts Tags

• Pack of 500 heat activated 2.5” x 4.25” 10 mil Luggage Tag size Laminating Pouches sealed on only one edge, and with slot shaped 1/2” x 1/8” (13mm x 3mm) hole punched at one short side for attachment device(s) [which must be purchased separately]. Order includes at least 5 reusable silicone coated laminating carriers for laminators that recommend them.
• Made of 2 Durable 10 mil polyester plastic sides including heat activated adhesive (20 mil total encapsulating and waterproofing your sheet) which becomes clear when heat and even pressure is applied (laminator recommended) [See 10 mil alert in description]
• Recommended insert sheet size Maximum: 2-1/4" x 3-11/16" (57mm x 94mm) to provide a minimum standard 1/8” (3mm) sealed border protecting your cards edges while avoiding the pre-slotted hole area (if desired)
• Small Pre-rounded Corners for a Smooth Professional Finish approximately 1/8” radius (3mm) approximately 1/8” radius (3mm)
• Metric Pouch size: 64mm x 108mm x 250 microns x 2 sides = 500 microns total thickness added to your card