Lfang-Welding Wire Low Temperature Easy Melt Aluminum Welding Rods Weld Bars Cored Wire 2mm Rod Solder No Need Solder Powder, Multipurpose Repair Rods(2.0mm,200pcs)
4.1 (77 items)
Limited Time SaleUS$43.07 cheaper than the new price!!
Free cash-on-delivery fees for purchases over $99
Product details
| Management number | 222700053 | Release Date | 2026/05/04 | List Price | US$28.72 | Model Number | 222700053 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Flux cored aluminum electrode. Specification: 1.6mm/2.0mm thick 50 cm long each. Low temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum alloy, cast aluminum, aluminum-magnesium alloy and dissimilar welding between the above-mentioned metals, even for white metals that have been seriously corroded or contaminated by oil. even aluminum alloys that are considered irreparable can be repaired. Suitable for all-round welding of primary welding operators, only a small heating device is needed, the weld strength after welding is generally higher than that of the base metal itself, and you can understand the gas welding operation. Instructions for the use of low temperature aluminum welding wire. One step: polish the surface through physical cleaning. Two steps: heating the surface of the base metal at the welding place until the temperature reaches the working temperature of the welding wire 380 ℃-400 ℃, so that you can rely on the heat conduction of the base metal to melt the welding wire to form a weld, do not burn the welding wire with flame, and only when the surface temperature of the base metal is enough, the welding wire can flow and infiltrate into the metal capillaries. Three steps: when repairing thinner aluminum, as long as the aluminum base metal is heated to a suitable working temperature, then the welding wire is rubbed back and forth to form a weld, and only a metal brush is used to fill the welding wire to form a weld. Pay attention to the details of the operation. 1. The surface of the base metal must be cleaned. That is, clear and weld. 2. The temperature of the base metal should reach 400 ℃, including the temperature of the base metal in the welding process should be kept at 400 ℃, and the temperature can be high or not low. 3. It is taboo to burn the welding wire deliberately with flame. When the temperature of the base metal reaches 400 ℃, the welding wire will naturally be melted by the heat conduction of the base metal.
- Great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
- Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment suitable for cryogenic applications
- Material: Aluminum
- Specification: 1.6mm/2.0mm/2.4mm thick 50 cm long each.
- Melting Temperature: 380 ° ~ 400 °
| Size | 2.0mm |
|---|---|
| Color | 200pcs |
| Item Weight | 3.53 ounces |
| Part Number | RMBNHGF |
| Manufacturer | RMBNHGF |
| Power Source | ac |
| Item model number | RMBNHGF |
| Batteries Required | No |
| Package Dimensions | 0.39 x 0.39 x 0.39 inches |
| Item Package Quantity | 1 |
Bestseller ranking
Tambourines
Customers who viewed this product also viewed
Welding Wire
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form