Mytee Products Heavy Duty Door Latch Striker Pin Replaces Kenworth K-250-68-1, K250681, Automann HLK2069, KW-K250-68-1,

Replace the old door latch of your vehicle with this Door Latch Striker Pin - Fits KW, Replaces OEM K250-68-1, Automann HLK2069, Paccar Parts KWK250681. This door latch pin keeps the vehicle door securely closed. Find more details about this product below:Size: The door latch striker pin has a thread size of M12-1.75 inch, a thred length of 18 mm, and a stud length of 18.8 mm. It also has a T50 head, which allows for secure installation. This door component is mainly for cab/sleeper doors.Design: The threaded section of this door component helps to screw it into the door frame. Its cylindrical body allows the door latch to slide and lock onto it smoothly. The flat shoulder ensures proper fitment and strength under stress.Application: This door latch pin is generally mounted on the door frame and is useful as it acts as an anchor point for the door latch when the door is closed. This door latch bolt grips onto the striker pin and holds the door shut completely. Compatibility: Check the complete compatibility list below:Compatible with Other Brands & Their Part Numbers:Fits Automann: HLK2069Safety ConsiderationsAlways wear safety gloves and eye protection while working with vehicle hardware to avoid injuries.Make sure the vehicle is parked on a flat, stable surface and the engine is off before beginning any installation work.Use proper tools to avoid stripping the fastener head or over-torquing.Be cautious of sharp edges inside the door frame when accessing or adjusting the striker pin.After installation, verify that the door latches and unlatches smoothly and that it does not open while driving.Installation InstructionsOpen the vehicle door fully and locate the existing door latch striker pin on the door frame or B-pillar.Use the appropriate tool to unscrew the old striker pin from the mounting hole.Align the new striker pin in the same position as the original. Insert and thread it into the mounting point.Tighten the striker pin securely, ensuring it is snug but not over-tightened to avoid damaging threads or misaligning the latch.Close the door slowly to test alignment—adjust the striker slightly if needed to ensure smooth engagement with the latch.Additional Installation Tips:Mark the original position of the striker pin before removal to help with realignment.Apply a small amount of anti-seize compound on the threads to ease future removal.After adjustment, check that the door closes flush with the body and doesn’t rattle or pop open.When to Replace?If the door doesn’t stay closed properly or pops open unexpectedly while driving.When you notice visible wear, rust, or deformation on the striker pin’s surface.If the door makes rattling, grinding, or clunking noises while driving or closing.When the latch fails to align properly despite adjusting the door or latch mechanism.During a restoration or major door hardware overhaul for consistent door performance and safety.

• Replacement OEMs: K250-68-1, KWK250681
• Application: Multiple KW Models; Color: Gold Chromate ; Function: Ensures Secure Closure and Proper Alignment of the Vehicle Door
• Head Type: T50 Thread Size: M12-1.75 Inch Thread Length: 18mm Stud Length: 18.8mm
• Compatibility: Automann HLK2069, KW K250-68-1, Paccar Parts KWK250681; Part Type: Door Latch Striker Pin
• 18-month Warranty: This product is covered for one year or completion of 100,000 miles since installation or 18 months after your purchase, whichever comes first.