Oil Pump Compatible with Dewalt 20V Max Battery(No Battery), 100W Oil Extractor Pump Oil Removal Pump for Oil Change, Electric Transfer Oil Pump with 2 Pipes for Cars Motorcycles RVs Boats

Specifications: Power: 100W Suitable Oil Temperature: 20-40°C Flow Rate: 2-3L/min Duty Cycle: 30min Battery: Compatible with dewalt 20v max battery (NOT included) Note: 1. Use only for extracting diesel fuel, engine oil, transmission oil, and hydraulic oil that are not highly flammable. It is prohibited to extract gasoline, flammable liquids, and water. 2. Make sure that the oil suction pipe is inserted straight into the opening of the dipstick. Insert it about 5-10 cm longer than the dipstick, but not too far (it could prevent it from being pulled out or get stuck). 3. Before suctioning oil, drive normally or idle for 15 minutes to warm up the oil so that it flows faster. 4. The adapter is heat-resistant but not bend-resistant. Keep both ends of the tubes as straight as possible during extraction and avoid bends greater than 30 degrees. 5. Open the engine oil filter cap to ensure air circulation. 6. After suctioning, flush the pump with a special cleaner to remove internal contaminants and extend its service life. 7. Do not use excessive force if the oil suction pipe is stuck. Wait until the engine and hose have cooled down, then turn the hose and pull it out.

• Compatibility: LEZZYRUCK Cordless Diesel Transfer Pump Compatible with Dewalt 20V MAX LITHIUM ION Battery, Such as DCB200 DCB201 DCB202 DCB203 DCB204 DCB205 DCB206 DCB230 DCB240. (Tool Only, Battery Not Included). TIPPS: For a Better Experience, Suggest Using Batteries with a Capacity of 4.0Ah or Higher
• Powerful: This diesel transfer pump is powered by a high-quality pure copper motor with an output of 100 W and a flow rate of approximately 2-3 l/min. The one-button operation is quick and easy, and the compact size makes it easy to store and transport anywhere. The motor and pump housing are completely separated from each other to prevent oil leakage during operation
• 2 Flexible Hoses: The package includes 2 transparent, flexible hoses, 0.8*100cm and 1*100cm respectively, which can monitor the flow of liquid at any time. The hoses are made of heat-resistant material and can withstand temperatures up to 260°C. Please note that the adapter connected to the hoses is heat-resistant but not bend-resistant. Keep the end of the hose as straight as possible and avoid bending it more than 30°
• Wide Application: This transfer pump is suitable for construction vehicles, mining and agricultural machinery, tractors, boats, and trucks that run on diesel or oil
• WARNING: Use only for extracting diesel, engine oil, transmission oil, and hydraulic oil, which are not highly flammable. Do not use for extracting gasoline and flammable liquids. It is also prohibited to extract water