WJB 2206-2RS Self Aligning Ball Bearing, ABEC-1, Double Sealed, Steel, Metric, 30mm Bore Diameter, 62mm Outer Diameter, 20mm Width, 6400 rpm, 1020 lbs Static Load Capacity, 3400 lbs Dynamic Load Capacity

This WJB double-row self-aligning ball bearing is double-sealed, and has a cylindrical bore, steel cage, and normal clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a straight bore for fitting on a conventional cylindrical shaft. Rubber seals on both sides of the bearing keep out contaminants such as dirt and grime and hold in lubricant applied at manufacture. This bearing has a steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The ball bearing has a normal radial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. This self-aligning ball bearing is for use in commercial and industrial applications including film processing equipment, office automation, vertical spinning equipment, and industrial countershafts, among others.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.WJB Bearings, Inc. manufactures various types of bearings and components including ball and roller bearings, bronze bushings, and sprockets and chains. The company, founded in 1992, is based in City of Industry, CA.

• Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
• Straight bore for fitting on a conventional cylindrical shaft
• Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
• Steel cage evenly spaces balls for reduced friction, vibration, and noise
• Normal radial internal clearance for applications where thermal expansion is not a factor