Yonico Guitar Finger Board Radiusing Router Bit Set 6 Bit 1/2-Inch Shank 13601

Replicate the finger board radiuses of all types of iconic guitars including vintage and modern fender strats, vintage and modern Gibsons, and many others. This set include 6 radiusing bits with the following radiuses: 7-1/4", 8-1/2", 9-1/2", 10", 12" And 16". These bits can accommodate fretboards up to 3-3/4" Wide. The bits feature C3 premium micro grain carbide blades and a 1/2" Shanks. A unique way to add a radius to your stringed instrument's fretboard. These radiusing bits will eliminate the excessive effort required for using a sanding block. Tape the finger board to a perfectly squared board and slide along the router Table fence with the top of the bit's blade running at the height of the center line of the finger board. This will radius one Half of the board. Then flip the stock to radius the other Half. Yonico fretboard radiusing router bits come in radiuses of 7-1/4", 8-1/2", 9-1/2", 10", 12" & 16".

• This set include 6 radiusing bits with the following radiuses: 7-1/4", 8-1/2", 9-1/2", 10", 12" and 16".
• Easily add a radius to guitar finger boards
• Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
• For use on table mount router
• Silver induction brazing for maximum strength and durability